X25 Undulator Chamber Commissioning

The undulator vacuum chamber was tested and commissioned by NSLS personnel

Walter DeBoer's vacuum works
Chamber seen from upstream
Glow discharge rod in cover

Mechanical and vacuum tests were carried out at the ADC factory by a team from the NSLS. The chamber was baked out with a glow discharge rod in the beam gap until a satisfactory residual gas analysis and UHV compatibility were achieved at 2x10^-9 torr. (September 2005).
Use mouse-over to view images.
John Skaritka, project engineer
Glow discharge vacuum baking


Updated 29 Dec 2005	Security Notice Webteam Site Map Bio PXRR NSLS BNL

Walter DeBoer's vacuum works	Chamber seen from upstream	Glow discharge rod in cover

Mechanical and vacuum tests were carried out at the ADC factory by a team from the NSLS. The chamber was baked out with a glow discharge rod in the beam gap until a satisfactory residual gas analysis and UHV compatibility were achieved at 2x10^-9 torr. (September 2005). Use mouse-over to view images.	John Skaritka, project engineer	Glow discharge vacuum baking